01
Single solid leaf
Flush steel leaf for controlled service and circulation openings.
Fire-rated systems
Doors, glazed profiles and steel windows for protected openings.
Our main range covers single doors, double doors, glazed doors, finished fire-rated glazing profiles and fixed steel windows. Each selected system must be matched to project-specific certification and approval.
Solid steel door range
Eight practical configurations. One disciplined visual standard.
Compare leaf arrangement, finish and hardware direction at a glance. Final rating and hardware remain subject to the approved project assembly.
02
Equal double leaf
Balanced pair for wider openings with coordinated panic hardware.
03
Unequal double leaf
Wide active leaf with a narrow inactive leaf for flexible access.
04
Single leaf with vision
A narrow glazed panel supports visibility and movement coordination.
05
Ivory single leaf
A calm architectural finish with coordinated closer, lever and kick plate.
06
Graphite exit pair
Equal solid leaves with coordinated panic bars, closers and kick plates.
07
Red panic-exit leaf
A high-visibility powder-coated configuration with panic hardware.
08
Bronze unequal pair
Wide active and narrow inactive leaves in a warm architectural finish.
Single fire-rated doors
Tested steel assemblies for controlled openings.
Certificate WHI25-44692901 / Spec ID 87798 covers selected latched steel doors and frames with honeycomb infill, tested to BS 476 Part 22.
BS 476 Part 22Intertek ListedUp to 180 min
Certificate validity and project applicability should be reconfirmed at enquiry stage. Certificate expiry shown in the current record: 31 December 2026.
Double fire-rated doors
Wider access. Coordinated protection.
Listed double-leaf configurations are available up to 120 minutes within the current Intertek scope, subject to final size, hardware and assembly selection.
Fire-rated glazed doors
Transparency with a verified system behind it.
Full-height glazed steel doors are offered as a system-led solution. The selected steel frame, fire-resistant glass, hardware and installation must carry the required project certification; no rating is implied by appearance alone.
Fire-rated glazed profiles
Finished profile faces—no exposed internal sections.
Slim steel framing for glazed screens and partitions, coordinated as a complete approved system with the specified fire-resistant glass and interfaces.
Fire-rated steel windows
Fixed glazed protection for internal and external openings.
Steel window frames, mullions, transoms and fire-resistant glazing are selected together to meet the required tested or assessed system.
Listed guide
Select a starting configuration.
The interactive result is a preliminary guide only, not a substitute for an approved door schedule or submittal.
Door configuration
Listed integrity guide
Up to 180 minutes
This is a listing-based guide. Final configuration depends on dimensions, hardware and project requirements.
Always obtain project-specific approval before procurement.
Request a QuoteReference configuration
Key listed construction parameters.
| Configuration | Door leaf | Frame | Maximum listed integrity |
|---|---|---|---|
| Single leaf | 1.0 mm / 45 mm | 1.2 mm / 150 mm jamb | 180 min |
| Double leaf | 1.2 mm / 45 mm | 1.5 mm | 120 min |
| Vision panel configurations | Per listed construction and approved glazing system | 60 / 90 / 120 min | |
Values above summarize the current listing record. Dimensions, glazing, hardware, anchors and installation must follow the approved project submittal and listing conditions.